'04 Accord anti-lock brakes

Discussion in 'Accord' started by joeshmoe, Dec 20, 2007.

  1. joeshmoe

    joeshmoe Guest

    Hello,

    Does anyone know the correct way to bleed anti-lock brakes? I installed new
    ceramic pads and Powerslot rotors and everything was great until I used my
    anti-lock brakes in slippery snow last weekend. Now I have a spongy pedal,
    almost as if I just put new pads on and they haven't seated yet.

    I wonder if I have an air bubble somewhere?

    thanks.
     
    joeshmoe, Dec 20, 2007
    #1
  2. joeshmoe

    motsco_ Guest

    -----------------------

    Probably a bubble. The bleeding method is the same for ABS and non-ABS.
    You checked the level in the reservoir and had it changed at all from
    when you did the work?

    'Curly'
     
    motsco_, Dec 20, 2007
    #2
  3. joeshmoe

    joeshmoe Guest

    Good point. I'll have to check the level in the morning.

    When I bled them I didn't get a whole lot of fluid out of the system. I
    thought that the pump and other components of the anti-lock system would
    hold more fluid than just what's normally in the reservoir.
     
    joeshmoe, Dec 20, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1995 Honda Passport Anti-Lock Brake Problem

  2. 91 Accord EX Anti-Lock Brakes

  3. Are Prelude (UK)97-01 anti lock brakes prone to expensive failures?

  4. Problem with shift lock and brakes lights in '95 Civic Ex

  5. Where to find anti theft lock radio?

  6. 96 civic aftermarket remote lock- door mechanism now needs the handle lifted to lock

  7. New Odyssey - first time I apply brakes in morning I hear "clack", "clack" from rear brakes - should

  8. 99 civic ex coupe lock problem; can't lock the driver side door.

Loading...