1988 Honda Prelude slave cylinder(s)???????? HELP

Discussion in 'Prelude' started by cathyinmo, Aug 10, 2006.

  1. cathyinmo

    cathyinmo Guest

    ok my fluid is leaking out of my holder. Took it to CarX (UGH) they said my
    slave cylinder was leaking and my clutch cable. Spoke with another mechanic
    he said he's done hundreds of slave repairs and not once was a clutch cable
    bad. BTW CarX 432.00 (quote)..2nd guy...said 91.00 to replace the slave
    cylinder ( I said I had the part) THEN talked to a 3rd guy...he sats there
    are 2 slave cylinders, and if you replace one you should do the other, and
    most likely the master cylinder too....HELP PLEASE
     
    cathyinmo, Aug 10, 2006
    #1
  2. cathyinmo

    cathyinmo Guest

    well my mom came and took it to another shop, he said the slavecylinders
    were fine it just needed the clutch hose (hydraulic???) even tho I can get
    the part from honda...she letting him do it to the tune of 200.00 oh wait
    that will include my inspection

    thanx anyways
     
    cathyinmo, Aug 10, 2006
    #2
  3. cathyinmo

    gfretwell Guest

    The slave cylinder was bad on my 97, the part was $30 and took about
    15 minutes to put in. Bleeding the system took longer than putting in
    the part.
     
    gfretwell, Feb 6, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Slave Cylinder

  2. where is the clutch slave cylinder

  3. 94 Civic: boot the clutch slave cylinder goes into??

  4. clutch master & slave cylinder replacement notes (94 Civic EX)

  5. 1988 Honda Accord Lxi 2.0 Engine swapped out with 1988 Honda Civic Engine?

  6. 2001 Honda CR-V TSB for cylinder not firing -- replace cylinder head

  7. 2002 Honda Accord SE, 4 Cylinder- Cylinder Compression issues

Loading...