1988 Prelude Power Antenna

Discussion in 'Prelude' started by justsid, May 4, 2004.

  1. justsid

    justsid Guest

    1988 Prelude Power Antenna

    Any one know how if it is possible to replace the antenna mast , or do I
    need a complete power unit?
    Car just purchased,radio on,went to close boot and the spoiler edge
    caught the antenna and mangled it into the boot rim.
    Crazy alignment of unit,and on investigating the fitting there seems no
    way of aligning to clear spoiler.
    Any ideas please! (yes, I know I could turn radio off before opening
    boot)

    justsid
     
    justsid, May 4, 2004
    #1
  2. justsid

    Charles Guest

    Any one know how if it is possible to replace the antenna mast , or do I need
    a complete power unit?

    Just purchase a new mast (US$40 or so). The motor and gearing are probably
    fine. I found it easiest to pull the unit out of the car and replace the mast
    on the bench. There is a another method in which you use a spanner wrench to
    remove the escutcheon nut at the fender. The keeps the mast from flying out of
    the tube when you turn on the radio. With the retaining nut off, pull the mast
    out and insert a new one. The flexible nylon drive rod will engage the toothed
    gear inside the motor assembly when you slide in the new mast.
     
    Charles, May 5, 2004
    #2
  3. justsid

    justsid Guest

    Thanks Charles, Just the info I needed

    justsid
     
    justsid, May 5, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.