1993 Acura Legend

Discussion in 'General Motoring' started by showanda, May 4, 2006.

  1. showanda

    showanda Guest

    The shift indicator light that is between the tacometer and spedometer
    on the dash flashes when in drive or reverse (the D4 light). Does
    anybody know what my problem is? Thank you.
     
    showanda, May 4, 2006
    #1
  2.  
    'Curly Q. Links', May 4, 2006
    #2
  3. showanda

    TeGGeR® Guest


    It's flashing a code number at you. How many times does it blink?
     
    TeGGeR®, May 5, 2006
    #3
  4. showanda

    showanda Guest

    I bought the car a month ago with 255k miles. Currently have 257k miles
    and I do not know when the tranny fluid was changed last (if ever). I
    was told the car was maintained regularly and when I bought it it was
    fine.

    Showanda
     
    showanda, May 5, 2006
    #4
  5. showanda

    showanda Guest

    I'll have to check how many times it blinks. It appears to blink a
    steady on/off; but I'll go check.

    Showanda
     
    showanda, May 5, 2006
    #5
  6. showanda

    showanda Guest

    I'll have to check how many times it blinks. It appears to blink a
    steady on/off; but I'll go check.

    Showanda
     
    showanda, May 5, 2006
    #6
  7. showanda

    TeGGeR® Guest


    Sorry, you have to short the Service Check connector for it to blink the
    code.

    The Service Check connector is a 2-pin connector located under the dash
    above the passenger kick panel. You might have to fish around behind the
    kick panel to find it. A paper clip will suffice as a jumper.
     
    TeGGeR®, May 6, 2006
    #7
  8. showanda

    TeGGeR® Guest


    AND the ignition has to be on (all dash lights light up) for the D4 to
    blink.
     
    TeGGeR®, May 6, 2006
    #8
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.