1993 Honda Accord - 4th to 5th gear noise

Discussion in 'Accord' started by fred.branham, May 26, 2006.

  1. fred.branham

    fred.branham Guest

    Looking to buy a used Accord (175k miles) and looks to be in nice
    shape, however during my test drive I did notice sometimes going from
    4th to 5th caused a slight grind noise. Is this a syncro problem? Is
    this a progressive problem? Only way to fix is a rebuild?
     
    fred.branham, May 26, 2006
    #1
  2. fred.branham

    tww Guest

    Synchro is probably bad. If this has been a problem for a while the gear
    may also be damaged.
     
    tww, May 26, 2006
    #2
  3. fred.branham

    TeGGeR® Guest

    wrote in

    Right now, the clutch is a much more likely culprit than the synchros. It's
    either misadjusted, or the cylinder(s) are leaking. Check that first.

    The 5th gear synchro usually lasts forever, as it has little work to do.
     
    TeGGeR®, May 26, 2006
    #3
  4. fred.branham

    Earle Horton Guest

    This is an odd symptom. Usually with bad synchros you would expect some
    noise or reluctance on a 2-3 or 3-2 shift. How is the shifting otherwise?
    I too am thinking clutch adjustment or hydraulic fluid leak.

    I was the mechanic for a commune in Western Massachusetts that had a large
    number of Honda 600s and then Civics, from about 1972 to 1978. I don't
    think that I ever had one with transmission problems then. We put five
    people in them, drove fifty miles to work each way, and even took them off
    road. It was serious Honda abuse, and they took it.

    Earle



    *** ***
     
    Earle Horton, May 26, 2006
    #4
  5. fred.branham

    tww Guest

    I don't know about that. Had a 5th gear synchro go out on a 99 Accord at 600
    miles. Had the same problem on an older Accord we bought used. Did exactly
    the same thing. If it is the clutch master/slave you should have problems
    just getting it into gear from a start.
     
    tww, May 26, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.