1994 Accord Low Bean Headlights

Discussion in 'Accord' started by Noooooooooo, Feb 29, 2004.

  1. Noooooooooo

    Noooooooooo Guest

    I just had one of my low beam headlights die on me. I followed the instructions in the manual to replace the bulb, but I ran into a problem. It seems as if the electrical connector is fused. I tried for about an hour to yank the connector off, but it didn't even budge (yes, I was squeezing the tab). Any thoughts? Thanks...
     
    Noooooooooo, Feb 29, 2004
    #1
  2. =================

    Look how there's holes in the lugs on the new lamp... It's hard, but the
    left and right sides of the connector have dots where you have to
    squeeze HARD to get the locks to come out of the holes in the lugs. By
    the time you're done, the lugs won't be gripping the lugs very well on
    the new lamp, and you may have to dissasemble the plastic hood and give
    the brass lugs a fresh squeeze with pliers.

    Odyssey has the same problem (and it gets worse if you have Daytime
    Driving Lights)

    'curly'

    ===============
     
    'Curly Q. Links', Feb 29, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.