1995 LX braking causes acceleration

Discussion in 'General Motoring' started by foobarian, Oct 29, 2007.

  1. foobarian

    foobarian Guest

    Hi all,

    Two times in the last few months it happened that applying brakes
    would cause the car to rev and surge forward before coming to a stop.
    Has something similar happened to anyone else? I'm getting it checked
    out shortly but wanted to know if it is a common problem. I heard of
    this issue on older Hondas but this is a '95 Accord.

    A
     
    foobarian, Oct 29, 2007
    #1
  2. foobarian

    Tegger Guest

    wrote in 22g2000hsm.googlegroups.com:

    When you step on the brakes with the car stopped, does the engine try to
    rev up?
     
    Tegger, Oct 29, 2007
    #2
  3. foobarian

    nick Guest

    If this is occurring when you are going downhill while still slowing
    down, it is normal. The transmission is downshifting.
     
    nick, Oct 30, 2007
    #3
  4. foobarian

    foobarian Guest

    Not normally, I can't really reproduce the fault. This happened only
    twice throughout the 9 years I had the car, and that's in the last 2
    months.

    During the incident, the timeline was more like: 1. press brake
    approaching intersection 2. car starts to slow down normally 3.
    engine revs up suddenly, surging the car forward, all the while
    holding the brake 4. press brake harder, car comes to a stop, with
    the revs coming down 5. revs back to normal.

    I'm starting to think it's some sort of sensor issue. If it was some
    mechanical snag between the control linkages it should happen way more
    predictably.

    Thanks for your thoughts!

    Aleks
     
    foobarian, Oct 30, 2007
    #4
  5. foobarian

    foobarian Guest

    It happened on level ground, though, and it was accelerative, unlike a
    transmission downshift. Besides, I don't think my tranny downshifts
    downhill, it stays in fourth or so until the torque converter stalls.

    A
     
    foobarian, Oct 30, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.