1998 Honda CRV LX clock

Discussion in 'CR-V' started by damn, May 22, 2006.

  1. damn

    damn Guest

    Hi All,
    Does anyone know how to remove the clock on a 1998 CRV. The clock
    keeps good time but the display light is intermitent. I need to get
    the clock out so I can fix the loose wiring. TIA.
     
    damn, May 22, 2006
    #1
  2. --------------------------------

    Might be a cold solder joint or some corrosion in the connector. You pry
    the whole dual air vent / clock assy out from the bottom using a flat
    putty knife wrapped in electrical or shipping tape. Once the bottom
    starts to come free it all pulls straight out. It doesn't have a
    removable bulb, unlike the Civic / Accord in this TSB:
    http://www.tegger.com/hondafaq/tsb/accord/x01-097e.pdf

    'Curly'
     
    'Curly Q. Links', May 22, 2006
    #2
  3. damn

    damn Guest

    Thank you Curly, knew I could count on you sir.

     
    damn, May 22, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.