2000 Civic Misfire Even After Tune Up?

Discussion in 'Civic' started by jbxnyr, Nov 10, 2006.

  1. jbxnyr

    jbxnyr Guest

    I've got a 2000 Civic. At high RPMs (just prior to shifting or highway
    speeds) it misfires...sometimes a little and sometimes alot. OBD codes
    show misfires in each cylinder. (Not alot of helpful info!) I
    replaced plugs, wires, cap, rotor, and PCV valve. It still misses and
    the OBD light is back on. I'm thinking that maybe the ignition module
    is faulty.

    Any other ideas out there?? THanks!!!

    --Jeff
     
    jbxnyr, Nov 10, 2006
    #1
  2. jbxnyr

    motsco_ Guest

    -------------------------------------

    What are all the actual CODES? I'm guessing you might also have a
    "catalyst below efficiency threshold' code too.

    What's the mileage and when did you last run a bottle of injector
    cleaner (or gasohol) through it?

    'Curly'
     
    motsco_, Nov 10, 2006
    #2
  3. jbxnyr

    jbxnyr Guest

    Oops!! Too late! Used my OBD2 scanner and cleared them. But it was
    misfire codes, not catalytic converter codes.

    Not a bad idea on the injector cleaner. But I'm still thinking its
    ignition, not fuel.

    The Civic has 70K miles.

    --Jeff
     
    jbxnyr, Nov 10, 2006
    #3
  4. jbxnyr

    TeGGeR® Guest

    wrote in


    Buddy, you don't know ZIP. And neither does anybody else at this point.

    Clearing the codes was not a bright idea. Wait 'til they come back,
    read and record them, then report back here.

    ***BE PRECISE***. Help us to help you.
     
    TeGGeR®, Nov 11, 2006
    #4
  5. Are the new parts OEM or aftermarket?
     
    High Tech Misfit, Nov 11, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.