2001 Accord Brake noise

Discussion in 'Accord' started by kobehater, Nov 8, 2006.

  1. kobehater

    kobehater Guest

    I have had this problem constantly since I bought the car in 2001. The
    front brakes rattle like the pads are always loose. No matter how many
    times i get the brakes done by Midas, Honda, or any other brake shop,
    it always start making this noise VERY soon afterward. One Honda
    dealer said that it's a known problem, but offered no solution. Am I
    the only person on earth getting this, and how do I fix it? HELP!!!
     
    kobehater, Nov 8, 2006
    #1
  2. kobehater

    TeGGeR® Guest



    It's a known problem with some light truck models, but not with the Accord.

    You need somebody knowledgeable to have a look at the brakes.

    Possible common causes:
    1) Pads very loose on mount bracket
    2) Anti-rattle spring in caliper is bent
    3) Rust buildup

    Item #1 is the problem with the CR-V, Odyssey, etc.

    Is the noise comng from front or rear?
     
    TeGGeR®, Nov 8, 2006
    #2
  3. kobehater

    kobehater Guest

    It's coming from the front only, and that's exactly what it sounds
    like, the pads are loose. I'll look into the loose mount (i honestly
    think this is what easily gets loose for some reason) and the spring.
     
    kobehater, Nov 9, 2006
    #3
  4. kobehater

    TeGGeR® Guest


    That mount bracket is on there pretty tight. If it ever got loose you'd
    have a very severe problem.

    When the caliper is pressed over the pads, the anti-rattle spring will
    need to be squished to get the pins to line up with the bolt holes in
    the caliper. If there's no resistance, then the spring is bent or
    missing.

    Maybe also see if the piston is behaving properly, to make sure it
    s not somehow retracting too far into the caliper when you let go of the
    pedal. How's your pedal travel? Do you feel the first hints of braking
    force within a half-inch of pedal travel?

    Point the car downhill in NEUTRAL, hold it with the parking brake,
    release the PB to let it roll a bit, then push the foot brake and watch
    how far it goes before you start to feel the first signs of braking
    effort.
     
    TeGGeR®, Nov 9, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.