2001 Accord windshield washer

Discussion in 'Accord' started by Flatlander, Jun 23, 2007.

  1. Flatlander

    Flatlander Guest

    Our 2001 Accord V6 has had the windshield washer pump fail. Access to
    the tank is pretty good through a removable panel underneath. However,
    I can't get the connector off of the pump. It's filled with a
    waterproofing grease and in an area I can reach with one hand but
    can't see. I've managed to pull off some sort of plastic shroud on
    the back of it. Still can't pull the connector off the tank, though.
    Anybody got an idea what the secret handshake is to get it loose?

    This would be a 10 minute job if it weren't for that.
     
    Flatlander, Jun 23, 2007
    #1
  2. Flatlander

    motsco_ Guest

    =================================

    You could visit the dealer or a wrecker to see the actual part, or the
    diagrams at www.slhondaparts might shed some light . . .

    'Curly'
     
    motsco_, Jun 24, 2007
    #2
  3. Flatlander

    Flatlander Guest

    Finally got it apart. I managed to clean enough grease off of the
    connector to see there is a locking tab on the forward upper part of
    the connector housing. You push that in and the connector comes off
    with almost no friction. It appears you need to take the power
    steering reservior loose for the neck to clear. However, if you put a
    quarter turn on the tank as you lower it, everything will drop down
    okay.
     
    Flatlander, Jun 28, 2007
    #3
  4. If we were designing a human today we would be smart to put an eyeball on at
    least one fingertip!

    Mike
     
    Michael Pardee, Jun 29, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.