84 Accord and it's clutch

Discussion in 'Accord' started by Steve Kulpa, Feb 2, 2006.

  1. Steve Kulpa

    Steve Kulpa Guest

    Greetings,
    I just bought an 84 Accord for my daughter and the cluch doesn't engage
    until the top of the pedal travel. Someone at work told he he thinks
    the 84 has a cable and can be adjusted, otherwise it needs a new
    clutch. I can't take it to my favorite shop until my next visit to
    Knoxville so I thought I'd look here for advice.

    thanks,
    steve
     
    Steve Kulpa, Feb 2, 2006
    #1
  2. Steve Kulpa

    TeGGeR® Guest



    I think this one is just like the cabled Civics and Integras.

    There should be a large black plastic nut at the engine end of the clutch
    cable. You pull the cable to raise the nut off its stopper, then spin the
    nut up the shaft with your thumb until 3/16" clearance is obtained.

    If it's been left too long, you will have difficulty pulling the cable up
    so as to disengage the nut from its rubber stop. If this is the case, post
    back here. There's a workaround.
     
    TeGGeR®, Feb 2, 2006
    #2
  3. Steve Kulpa

    Steve Kulpa Guest

    Thanks for the suggestion!!! I'll take a look and see!

    steve
     
    Steve Kulpa, Feb 2, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.