`87 Accord just stop running

Discussion in 'Accord' started by DZCAMMAN, Oct 24, 2005.

  1. DZCAMMAN

    DZCAMMAN Guest

    `87 Accord fuel injected Stop running like someone turned off the key. fuel
    pressure OK. No fuel getting to cylinders, plugs are dry. Main relay
    checked out ok. Any ideas ??
     
    DZCAMMAN, Oct 24, 2005
    #1
  2. DZCAMMAN

    Burt S. Guest

    Possibly ignition electrical switch. Dash light and BLK/YL should
    have battery voltage when the ignition is switch to "ON."
    Check the fuel injectors with a test light.
     
    Burt S., Oct 24, 2005
    #2
  3. DZCAMMAN

    TeGGeR® Guest


    Have you checked for ECU codes?

    Fuel pressure OK, but fuel not getting to injectors??? This does NOT make
    sense. How do you know the pressure's OK?
     
    TeGGeR®, Oct 26, 2005
    #3
  4. DZCAMMAN

    Burt S. Guest

    Yes it does. If you disconnect pin 3 on the main relay, you have pressure
    but no injector. Note he said, "No fuel getting to cylinders."
     
    Burt S., Oct 26, 2005
    #4
  5. DZCAMMAN

    TeGGeR® Guest


    And so it says in my very own FAQ. You are 100% correct.

    In fact, cracked solder to the injector feed is one of the failure modes of
    the Main Relay, but...it will set a Check Engine light with a Code 16. If
    no Code 16, then the ECU is seeing voltage when it tries to ground the
    injectors.
    http://www.tegger.com/hondafaq/mainrelayoperation/badmainrelay.html



    To the OP: Is your Check Engine light on? Are error codes stored in the
    ECU? How to check:
    http://www.iequus.com/assets/manuals/3173_ICCR_E_14JAN03.pdf

    Excerpt from above link:
    "Access ECU (located under front driver’s seat) (H4) by moving seat
    all the way back. Turn ignition on and observe LED on ECU for codes.
    Codes blinked out by LED are separated by two second pause, then repeated.
    For example:
    2 blinks - two
    second pause - 2 blinks = code 2 (H14)"
     
    TeGGeR®, Oct 26, 2005
    #5
  6. DZCAMMAN

    DZCAMMAN Guest

    I don’t know why I didn't think of it before but I only checked two plugs.
    Then I thought if the timing belt snapped the intake valves could be in
    the closed position. Sure enough the timing belt is toast. Thanks for
    responding.
    DZ
     
    DZCAMMAN, Nov 1, 2005
    #6
  7. DZCAMMAN

    DZCAMMAN Guest

    I don’t know why I didn't think of it before but I only checked two plugs.
    Then I thought if the timing belt snapped the intake valves could be in
    the closed position. Sure enough the timing belt is toast. Thanks for
    responding.
    DZ
     
    DZCAMMAN, Nov 1, 2005
    #7
  8. DZCAMMAN

    boobie Guest

    wow 18-yr-old Honda...what's the milage ?
     
    boobie, Nov 3, 2005
    #8
  9. DZCAMMAN

    Matt Ion Guest

    My current '87 Accord (my third now) is at 390,000km (about 244,000
    miles). My first '87 had 160,000km (100,000mi.) when I got it in '94
    and 478,000km (just shy of 300,000mi.) when I wrote it off in '03.

    These are great cars!
     
    Matt Ion, Nov 4, 2005
    #9
  10. DZCAMMAN

    boobie Guest

    "Matt Ion"
    Wow, what are your secrets ? you must baby the thing huh ;)
    You musta be very good at car mechanics eh ?

    I just got rid of my 90 Legend at <sigh>only</sigh> 160K miles for like
    US$900.
    It was in rather poor condition...I didn't take good care of it. :(

    I suppose that car (Japan-built, awesome engine) in your hand
    would last 500K miles.
     
    boobie, Nov 5, 2005
    #10
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.