88 Honda Accord LXi Headlights dim

Discussion in 'Accord' started by Michael O'Brien, Dec 13, 2003.

  1. Hey,
    I have an 88 Honda Accord LXi. I bought it used and, according to the
    previous owner, it had sat unused for quite some time.

    My problem is, the lowbeam headlights are so dim, I have better
    visibility when I use my turn signal. Only one light has a working
    highbeam, which appears to be at full power.

    I checked all the fuses-- they are good.
    I repleaced both sealed-beam lamps--

    When replacing the lamps, I noticed a lot of flaking and corrosion on
    the "plugs." This is the only thing I can think of that would be
    causing the problem with the lights.

    Is there anyone that can sell me new "plugs" or does anyone have any
    tips on how to clean or repair these? (Or, if someone has an
    alternate diagnosis, I'd love to hear it)

    thanks in advance.

    -O'Brien
     
    Michael O'Brien, Dec 13, 2003
    #1
  2. Michael O'Brien

    Randolph Guest

    I think your diagnosis is right on. Pep-Boys has an assortment of
    headlight plugs and I am sure most other auto parts stores do as well.
     
    Randolph, Dec 14, 2003
    #2
  3. Your local auto parts store should have new plugs you can splice in.
    Cut out the old plugs and then solder in the new plugs. Then cover up
    the solder joint with some heat shrink tubing.
     
    Alex Rodriguez, Dec 15, 2003
    #3
  4. Michael O'Brien

    okhonda88 Guest

    Faulty ground connections can cause that kind of a problem.
     
    okhonda88, Dec 16, 2003
    #4
  5. Michael O'Brien

    lcopps Guest

    I think it is the wire. I had to replace the jump wire between the light
    and the assembly in my '88 Accord DX. The movement of the the lights
    eventually weaken the wires and they break. Possibly your ground broke.
     
    lcopps, Dec 16, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.