90 Acura Legend starter

Discussion in 'General Motoring' started by Richard Schneiderman, Sep 5, 2004.

  1. Richard Schneiderman

    Richard Schneiderman Guest

    Starter went bad as car sat idle for 5 months..

    I was able to remove the starter bolts, Cannot figure how to get the started
    separated from the wire.
    I see that it's connected to the frame on the other side of the site where
    the positive terminal is connected.

    Can someone tell me explicit instruction for disconnecting the starter from
    this wire. Does the wire come off the vehicle or is it attached for all
    time.

    Do I have to cut this wire? What do I do to get this thing tested?
    Thanks a whole bunch, in advance.
     
    Richard Schneiderman, Sep 5, 2004
    #1
  2. Richard Schneiderman

    Jafir Elkurd Guest

    One wire has a spade connector under a boot.... The other is a nut under a
    boot. Pull the rubber boots back.
     
    Jafir Elkurd, Sep 5, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. AD: Parting out a 1989 Acura Legend - 5 spd - Manual

  2. FS: 1988 Acura Legend LS Coupe

  3. 1986 Acura Legend Problem

  4. 1993 Acura Legend

  5. 89 acura legend v6 running rough

  6. BYE BYE to Acura RL, Acura Legend globally and Civic in JP

  7. Tires for 93 Acura Legend LS?

  8. 93 Acura Legend LS Check-up?

Loading...