91 Accord - Help with front brakes

Discussion in 'Accord' started by Joe Guarino, Nov 16, 2003.

  1. Joe Guarino

    Joe Guarino Guest

    91 Accord 2 dr. Replaced front rotors, new pads, rebuilt calipers. Found
    front left to be dragging, could feel heat from rotor. Replaced caliper with
    rebuilt and put on new front left rotor (in case first one was warped.)
    After change, still found to be dragging, can still feel heat from rotor.
    Right side has never been a problem, runs cool. On left side, pads seems to
    fit into caliper mounting bracket ok. Any ideas why the front left caliper
    is not releasing, following application of brakes? New brake hardware was
    provided with caliper. Is there a need to clean out the mounting holes in
    the caliper mounting bracket, to insure free movement of the caliper? I'm
    stumped.....any help is appreciated. Joe
     
    Joe Guarino, Nov 16, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.