91 Accord power antenna replacement

Discussion in 'Accord' started by Howard, Jun 5, 2004.

  1. Howard

    Howard Guest

    How do i get old one off and new one in ??????
     
    Howard, Jun 5, 2004
    #1
  2. Howard

    Jafir Elkurd Guest

    If it is just the mast..... remove the special nut with the special tool
    (or a set of bent tip needle nose)... then turn on the radio... as the
    antenna comes up.... pull it the rest of the way out. If the cable end
    looks broken, then there is likely a chunk stuck in the motor... and you
    will have to remove the motor and take the cover off to get it out. to
    install the new mast... have someone turn the radio off while you feed the
    cable in. Reinstall special nut.
     
    Jafir Elkurd, Jun 5, 2004
    #2
  3. Howard

    Toan Guest

    Hi All,

    I tried replacing my friends antenna this weekend but I couldn't get
    the old mast to come out. It seemed to hit a "lip" on the bottom of
    the mast. I removed the whole motor, removed the broken piece inside
    the casing, made sure the remaining antenna mast wasn't contacting the
    motor gears, but still wasn't able to get the mast out. Anyone else
    encounter this? Got any tips? I've replaced it on other cars before
    but have never encounter this particular problem. Usually the mast
    comes out pretty easily when the radio is turned on. Anyways, any help
    would be appreciated.

    Oh, I ordered a mast from ebay for ~22. really cheap compared to
    previous posts i saw saying that the mast was really expensive (it is
    though from the dealer).

    Thanks,
    Toan
     
    Toan, Jun 15, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.