93 civic jdm conversion

Discussion in 'Civic' started by RockeyBA, Jul 28, 2006.

  1. RockeyBA

    RockeyBA Guest

    I am currently looking for a motor trans ecu and harness for my 93 civic
    hatch. How difficult is it to drop in a jdm b16a. I have replaced the
    motor in the past but never with a jdm. pleasehelp me out thanks
    Brett
     
    RockeyBA, Jul 28, 2006
    #1
  2. RockeyBA

    jim beam Guest

    what's the question??? can it be done? yes. can if be done legally?
    depends on which state you're in. can it be done easily? that depends
    on your skill level. google, 'ees yor fren'.
     
    jim beam, Jul 28, 2006
    #2
  3. RockeyBA

    RockeyBA Guest

    I live in michigan where we have no emissions laws. its sweet. i hav like I
    said replaced the motor once before. but I was wondering what is so
    different about a Jdm.
     
    RockeyBA, Jul 28, 2006
    #3
  4. RockeyBA

    jim beam Guest

    if you're replacing a d16 with a jdm d16 of the same series, there's
    nothing much different. if otoh you're replacing with a different
    series engine, you have compatibility issues to iron out, but it's all
    been done before and is widely documented on the net. jdm itself is not
    an issue unless it's a motor not available here, but even then,
    practically every swap combo you can imagine has been done before and
    you'll fine write-ups on what to do on the net easily enough.
     
    jim beam, Jul 30, 2006
    #4
  5. RockeyBA

    rcman005 Guest

    Honda H Emblem Badge Shop and Store Civic Accord Integra Acura Jazz
    Type-R S2000

    Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?

    Who buy these badge in www.autoxpat.com ?

    http://www.autoxpat.com/shop/

    Please comment and address about this shop of price and services ..

    Regards,

    RC Man
     
    rcman005, Aug 1, 2006
    #5
  6. RockeyBA

    RockeyBA Guest

    i would be converting from a D16 to a B16 I am unable to really find a good
    source on the net that answers any questions. i know that I will need new
    motor mounts ecu wiring harness and transmission, and axles. But is there
    anything else I may need? What conversions would have to be done. I dont
    want to order this motor and be screwed. thanks again
     
    RockeyBA, Aug 5, 2006
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.