93 Prelude Help

Discussion in 'Prelude' started by John, Jan 12, 2004.

  1. John

    John Guest

    Hello,

    Hope someone can help. I had a valve job done on my 93 prelude 2.3 Litre.
    The machine shop removed the dowel pins to surface the head and I'm not sure
    what hole they go back in to. Also, I'm not sure how many there are
    supposed to be, I got 2 back. One last thing, the old ones are pretty beat,
    is it possible to get replacements for them and if so, where?

    Thanks,
    John
     
    John, Jan 12, 2004
    #1
  2. John

    Tibur Waltson Guest

    Both goes to firewall side corners on 2.2 ltr engine. Can't
    you plug it into the block?
    Most Honda has 2 dowel pins and one oil control jet with
    an o-ring stuck on the block.
    Yes, but the dowel pins don't serve much purpose other than align
    the head to the block. If they're beat, you may want to
    beat them up to shape.
    Waltson
     
    Tibur Waltson, Jan 14, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '86 Prelude 1.8 dual carb failed inspection... I could use some help.

  2. Aircon help please 91 Prelude

  3. Help; 1983 Prelude just quit running and won't start

  4. 1988 prelude oil leak help

  5. Help! 91 Prelude Oil light is coming on.

  6. Help Finding the DLC on a 95 Prelude Si.....

  7. HELP!! prelude 1992 ignition problem

  8. 94 Prelude Prelude - Gearshifting on a manual

Loading...