96 Accord speed signal

Discussion in 'Accord' started by JanN, Aug 15, 2006.

  1. JanN

    JanN Guest

    In my car, 1996 Accord (4 cyl 2.2l) I need to get access to the VSS signal
    (for cruise control installation).
    Where (in the engine bay) would be the best place to access this?
    In my previous 1991 Accord it was an orange wire, and it was easily accessed
    at a connector on the driver's side fender.

    Regards,
    Jan
     
    JanN, Aug 15, 2006
    #1
  2. JanN

    JanN Guest

    Found out that the VSS is on pin #12 on the 14-pin connector located on the
    driver's side fender,
    near the windscreen (in the bracket attached to the FI resistor block).
    Double checked by measuring
    between the 3-pin connector at the VSS sensor and pin 12 on the 14-pin.
    This will work great for hooking up my (aftermarket) cruise!

    Regards,
    Jan
     
    JanN, Aug 16, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Turn Signal Relay - 95 Accord

  2. Accord blinker turn signal relay clicking FAST when not actuated

  3. Accord LX seat belt signal hassle

  4. Odyssey 4 Speed versus 5 Speed and other question

  5. 2003 Accord Turn signal

  6. Old Accord turn signal

  7. Turn signal flasher - 94 Accord

Loading...