96 Honda Accord daylight running lights problem

Discussion in 'Accord' started by me, Feb 17, 2005.

  1. me

    me Guest

    I have an intermittent problem with Daylight Running Lights in my 96 Accord.
    My Daylight Running Lights fail to come on and it's indicating light on the
    dashboard comes on.
    This is only happening after the car has been run for a while, tuned off
    then turned on again while still hot. It does not happen when you first
    start the car, nor does it came on if you run the car for a long time when
    started from cold.
    When it does happen I also loose the High Beam on the passenger side only.
    My local electrical shop already changed a couple of things and all the
    bulbs but no success.
    Any ideas?
    Thanks in advance
    Mike Edwards
     
    me, Feb 17, 2005
    #1
  2. me

    Nightdude Guest

    The relay must have a cold solder. I had to resolder all the joints to fix
    it. It should be next to the glove box on the right side of the car.

    You'll notice that your high beams will also not work.
     
    Nightdude, Feb 17, 2005
    #2
  3. me

    Eric Guest

    I have the same problem on my 91 Accord which is Canada version. It turns
    out solder joints crack. You need to find out the day time running light
    module, open it and do the soldering job.

    Eric
     
    Eric, Feb 18, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.