96 honda accord ignition lock

Discussion in 'Accord' started by dpfiend, Dec 20, 2005.

  1. dpfiend

    dpfiend Guest

    my car was broken into and was atempted to be stolen. I now have to replace
    the ignition lock cylinder, the bolts that attach the lock part to the
    steering column are very hard to remove. does anyone have any instructions
    on completeing this task????
     
    dpfiend, Dec 20, 2005
    #1
  2. dpfiend

    TeGGeR® Guest




    If it's just the cylinder that's damaged, you don't need to remove the
    shear bolts.

    If it's anything like the Civic: Put the key in, and turn it to "1". Remove
    the tiny set screw from the underside of the lock body. Push in the small
    pin on top, and withdraw the lock cylinder.

    My Helm manual for the '96 is surprisingly vague on this point, so I'm
    guessing it's the same as earlier models.
     
    TeGGeR®, Dec 20, 2005
    #2
  3. dpfiend

    AZ Nomad Guest

    shop manual
     
    AZ Nomad, Dec 20, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1990 CRX DX Ignition Steering Lock collar

  2. 90 Accord trouble getting ignition key out of lock

  3. Ignition Lock Cylinder

  4. 96 civic aftermarket remote lock- door mechanism now needs the handle lifted to lock

  5. 90 Civic, Stuck ignition lock, help!

  6. 1994 Honda Civic- Ignition lock

  7. 99 civic ex coupe lock problem; can't lock the driver side door.

  8. Honda Element Ignition Lock No Start

Loading...