98 accord V6 intake port question

Discussion in 'Accord' started by Matthew, Jul 9, 2005.

  1. Matthew

    Matthew Guest

    Greetings to all,
    I have a 98 Accord EX V6. Had the intake ports cleaned and bored out per the
    TSB at ~45,000 miles, no charge. Well...at 88,500 the check engine light
    went on again, and the code was related to the intake ports (again) and the
    EGR. I spoke to the tech himself who seemed very knowledgeable, said this
    happens commonly at ~90k miles. Ports cleaned and EGR replaced to the tune
    of $265.
    My question to the forum is: do any of those after market "valve cleaners"
    etc reduce the frequency of this port clogging that is inherent in the
    Accord V6 engines. If so, then what products are good?/
    Thanks!!
    Matthew
     
    Matthew, Jul 9, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Honda 97 SE Accord some observations - funky emissions test port - bad window motor

  2. Odyssey transmission fill port

  3. Honda CRV - OBDII port location

  4. OBD-II port on 2006 Accord?

  5. Best Port to Check 94 Accord i4 Oil Pressure?

  6. Diagnostic OBD11 port on Honda Accord 99 (European)

  7. canada import car from Japan, New west Minster Port, vanouver---thronged with

Loading...