99' Civic OEM Stereo Replacing

Discussion in 'Civic' started by Sam Cormier, Nov 2, 2004.

  1. Sam Cormier

    Sam Cormier Guest

    Guys I want to replace my 2 unit stereo (radio & single cd)
    I'm going to need a pocket to fill in the empty spot below.

    Is this all I need or is there more hardware required?

    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5728989329

    Thanks,
    Sam
     
    Sam Cormier, Nov 2, 2004
    #1
  2. Sam Cormier

    Jamco Guest

    you'll probably need the full mounting kit, that goes around the deck, and
    that pocket that goes below the deck. Usually the mounting kit comes with
    the pocket. I bought mine for $20 candian. You may also want to get a
    wiring harnest. That way you can just plug your wires into it, then into
    your deck, instead of cutting off the current wires.
    Good luck
     
    Jamco, Nov 2, 2004
    #2
  3. Sam Cormier

    Sam Cormier Guest

    I'm also in Canada
    Where'd you pick up that kit?

    Do you think a place like Futureshop would have the parts
    that I need (pocket) and do the whole install even?

    Thanks,
    Sam
     
    Sam Cormier, Nov 4, 2004
    #3
  4. Sam Cormier

    Jamco Guest

    I went to futureshop, and they had the kit, and would install it with the
    deck, but they won't sell me the kit so I could do it on my own. I ended up
    finding the kit for my car at a&b sound.

    good luck
     
    Jamco, Nov 8, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.