after market radio prob

Discussion in 'General Motoring' started by 02civic, Oct 10, 2006.

  1. 02civic

    02civic Guest

    bought a pioneer headunit for my car and had a couple friends of mine
    handle installing it.theyve done this for me in the past and i havent
    had a prob...but this time the headunit will not recieve anything but
    static for AM. Fm cd and all its other features i use work fine; just
    the am is all static. manufacturers warranty is void if its installed
    by "your buddies" it seems. anyone have any troubleshooting tips....
     
    02civic, Oct 10, 2006
    #1
  2. 02civic

    nm5k Guest

    Dunno.. Sounds like an antenna, or cable/connector problem.
    Is the antenna made to work AM and FM? Correct impedance
    cable, etc? If you are using the stock antenna, it should work ok..
    One note.. The typical AM antenna on a car is a high impedance
    voltage probe of sorts. It differs from the usual FM whip. Make sure
    both conductors of the feedline "center wire, and shield" are actually
    making a good connection on both ends of the cable. "radio and
    antenna". Make sure the antenna ground is good. It's possible the
    radio is flaky, but I kind of doubt it. It's probably ok. That it
    picks
    up static is a good sign.
    MK
     
    nm5k, Oct 11, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.