air mix control cable

Discussion in 'General Motoring' started by Paris Ligi, Mar 16, 2006.

  1. Paris Ligi

    Paris Ligi Guest

    Hello All,

    I own a 95 accord and the air mix control cable is either very loose or
    broken - it was very hard to turn and would not stay set at the max heat
    setting - now the cable is very loose allowing the knob to turn nearly 360
    degrees... it still seems to partially work ,but get very little heat .

    Does anyone know what is involved in reparing this? Is it something a
    weekend mechanic can handle?

    Any assistance woould be appreciated.

    P Ligi
     
    Paris Ligi, Mar 16, 2006
    #1
  2. Assuming it is the same setup as the '93 I worked on, it's easy enough. The
    air mix controls are accessed by removing the trim panel on the passenger
    side of the bottom of the center console. The cables are clearly visible and
    reasonably accessible, and when you try to turn the knob the workings are
    clear. IIRC the cables are adjusted by the clamps on the sheaths.

    Mike
     
    Michael Pardee, Mar 16, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.