alarm problem

Discussion in 'General Motoring' started by wku1990, Oct 4, 2006.

  1. wku1990

    wku1990 Guest

    I have a 99 Accord with the factory installed alarm system. I have been
    having some issues with it and had 2 separate incidents tonight. The
    first time, I used the keyless to lock the car from the outside when I
    went into the store. My teenage daughter was in the car and opened the
    door from inside when I returned to the car. The alarm sounded when she
    opened the door. I entered the code on the radio, but it did not
    silence the alarm. I started the car, but the alarm kept going. Then
    when we got home, I opened the driver's side door and the alarm went
    off again. And, again, entering the code on the radio did no good. The
    neighbors loved me...

    Any idea why this is happening and/or how to get the alarm to stop if
    the code doesn't work?
     
    wku1990, Oct 4, 2006
    #1
  2. wku1990

    FunkyKev Guest

    I have a 98 Accord and strangely enough mine freaked out Today (Tues.)
    too. I locked it. Later I unlocked it and entered the passenger side
    and the alarm went off. Key then wouldn't turn in the driver's door
    and I think the remote is going dead/getting weak. The remote wouldn't
    cancel the alarm.

    ANSWER: When the alarm goes off I believe the procedure is shut the
    door and press and HOLD the Lock or Unlock on the keyfob for...I
    think...5 seconds. Doesn't always work for me the first time but it
    does work. Never heard the radio code thing before. Hope that helps.

    kevin
     
    FunkyKev, Oct 4, 2006
    #2
  3. ------------------------------------------

    The word CODE on the radio has N O T H I N G to do with your alarm
    system. You need to read your manuals. I could install your Honda radio
    in a Chev and it would still show CODE when I powered it up. I'd enter
    the anti-theft code and it would work perfectly for 5 years until
    somebody disconnected the battery. Then I'd enter the CODE again.

    Your car alarm (assuming it's Honda) has to be shut off using the
    'unlock' button on the remote. If you unlock the car but don't touch it,
    it will relock (and re-arm) in 15? seconds. Please read these PDI sheets
    for some help (they are for a newer model, but should help)
    http://www.tegger.com/hondafaq/tsb/accord/x02-051e.pdf

    'Curly'
     
    'Curly Q. Links', Oct 4, 2006
    #3
  4. wku1990

    wku1990 Guest

    Thanks, Curly. I really swear, though, that I've stopped the alarm with
    the code in the past. Just a coincidence?
    I know I needed to read the manual, but it was in my car and I honestly
    didn't want to open my door again because I figured I'd trigger the
    alarm once more. Then the neighbors were really going to get me. I knew
    someone in cyber space would help me :)
     
    wku1990, Oct 5, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.