Anti Theft stereo on 1992 Accord

Discussion in 'Accord' started by sadj.net, Jul 24, 2003.

  1. sadj.net

    sadj.net Guest

    I recently purchased a 92 Accord EX. The previous owner gave me the
    card with the code and serial for the stereo and when I 1st bought it
    I was able to enter it just fine. I started having the notorious can't
    start in hot weather problem, so I replaced the main relay. After I
    reconnected the battery and turned on the stereo, it says code,
    however when I try to enter the code nothing happens. The preset
    buttons don't light up or anything. Has anybody else had this problem
    and no a fix for it?

    Thanks,

    Jason

    www.sadj.net
     
    sadj.net, Jul 24, 2003
    #1
  2. ------------------------------

    Remove negative battery terminal for a few seconds and reconnect WITHOUT
    SPARKING too much. It scrambles things so your radio doesn't do a 'clean
    boot'. Pepsi in the selector buttons will prevent the code entering
    properly. Be aware of that too.

    'Curly'

    -----------------------------------------------

    To REPLY: You must remove two underscores from the return address to
    reply directly . . . . . .

    Regarding stage performances: When everyone else has finished playing,
    you should not play any notes you have left over. -
     
    'Curly Q. Links', Jul 25, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.