Antifreeze in Oil - Headgasket?

Discussion in 'General Motoring' started by Jerry, Apr 10, 2004.

  1. Jerry

    Jerry Guest

    Hi,

    My 1991 Honda Civic (234,000) started running foul the other day. I took
    out all the plugs and cylinder 1 and 2 plugs were soaked with oil - I
    noticed a greenish color and sure enough - there is antifreeze in my oil.

    Cylinders 3 and 4 are both "dry".

    Can anybody offer any guesses as to whether these symptoms point to the head
    gasket? I really hate to get rid of this car - just put a new alternator
    and battery in it and overall it serves me well.... BUT - I can't afford to
    keep dumping money into her if it's something serious.

    Any help or suggestions are appriciated.

    Jerry
     
    Jerry, Apr 10, 2004
    #1
  2. There probably isn't a more obvious hint towards a bad head gasket.

    CaptainKrunch
     
    CaptainKrunch, Apr 10, 2004
    #2
  3. Jerry

    Jerry Guest

    Thanks Captain,

    I kinda figured - i've read enough in these newsgroups to lean that way but
    I'm not smart enough to come up with any other possibilities.

    I appreciate your response.

    Jerry
     
    Jerry, Apr 10, 2004
    #3
  4. Jerry

    Eric Guest

    Other possibilities - Sometimes the aluminum castings, e.g., block and
    cylinder head, can get pinhole leaks in them due to corrosion. I had this
    happen to me on the intake manifold in a '78 Accord. It allowed coolant
    into the cylinder and simulated a blown head gasket (white antifreeze
    smoke). In your case with antifreeze in the oil, a blown head gasket would
    be easier to replace.

    Eric
     
    Eric, Apr 11, 2004
    #4
  5. Jerry

    Charlie S Guest

    Check out Steelseal, I have used it and it worked on my car. It's a
    liquid you put in the coolant then run the engine, per instructions,
    and there is a good chance you may fix the problem.

    http://www.steelseal.com/eng/home.html

    It is my understanding that Steelseal, at engine operating
    temperature, when it comes in contact with air (at cracked block or
    blown head gasket) reacts to become steel or something like steel.

    If it dosen't work, you are only out $50 to $60 and you can flush it
    out and spend $1000 or more.
     
    Charlie S, Apr 12, 2004
    #5
  6. Jerry

    Jerry Guest

    Hey... I like that and will give it a try - Thanks.

    If it doesn't work - I won't be spending any money to fix it - it just isn't
    worth it. Even if I could do it myself, it's not worth the time so she'll
    get ebayed. In this case it's a shame. I love the car - it just feels
    great and still handles really really well. The engine is noisy and is
    probably ready to die. Unfortunately, no car repair seems to come in under
    $500 anymore. Probably would be cheaper to buy a used engine and have
    somebody slap it in. Less technical anyway.

    I'll consider SteelSeal - thanks
    Jerry
     
    Jerry, Apr 12, 2004
    #6
  7. Jerry

    Charlie S Guest

    Jerry, My car had oil in the coolant and coolant in the oil and there
    was a tick-tick sound from the engine. After I installed the
    Steelseal, there was no oil in the coolant, no coolant in the oil and
    the tick-tick sound stopped.
    You have to follow follow instructions 100% or more. I put cardboard
    in front of the radiator and watched the temperature guage and tried
    to get it to above normal operating temperature.
     
    Charlie S, Apr 13, 2004
    #7
  8. Jerry

    Condor Guest

    It is probably a head gasket.
    It should eventually spread to the other cylinders.
     
    Condor, Apr 15, 2004
    #8
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.