Attempted to replace passenger CV axle now car cranks and doesn't start (2008 civic si)

Discussion in 'General Motoring' started by aidan2326, Jun 26, 2024.

  1. aidan2326

    aidan2326 New Member

    Joined:
    Jun 26, 2024
    Messages:
    1
    Likes Received:
    0
    Location:
    Indiana
    I recently noticed that my passenger CV axle was damaged and needed replaced, and today I was TRYING to remove the axle nut and it got dark, so I lowered the car off of the jack and tried to start it and it just cranks. This makes absolutely no sense to me, because I literally have removed NOTHING from my car. The only thing that I can possibly think of is the timing jumped a tooth..? I had the car in first gear while trying to break the axle nut loose with an impact and a breaker bar. Any tips or suggestions are greatly appreciated.
     
    aidan2326, Jun 26, 2024
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. New CV axle and struts now clicking noise when braking....

  2. Accord cranks, no start

  3. Goodson Honda in Houston TX ATTEMPTED RIPOFF IMO

  4. 2000 Accord just cranks does not start

  5. 2000 Accord just cranks does not start FLASHING GREEN KEY

  6. How many cranks is normal to start a car?

  7. 94 accord cranks but won't start

  8. CV axle change and now no start

Loading...