auto cop with gps tracking system

Discussion in 'General Motoring' started by Anand, Aug 30, 2006.

  1. Anand

    Anand Guest

    hi,
    i am having one vehicle tracking system which i want to install in my
    car which is having center lock system (operation with remote).

    now the tracking unit i have is having three wires comming out ("COM",
    "NC" , "NO").
    if "com" connected to (+12dc) the "NC" give the +12v output while "no"
    act as grd. when the unit is given command "no" gives +12v and "nc"
    grd.

    i want this to connect to door lock which have 2 wires to the motor one
    +12v one (grd), when remote triggerd the polarity changes and the lock
    opens and close.

    how can i connect these two,?
    will it be any short circuit if the commands entered from both (remote
    and tracking unit).?
     
    Anand, Aug 30, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Would incorrect tracking cause steering wheel vibration ?

  2. GPS Vehicle Tracking; Do You Know Where Your Teen Driver Is Now?

  3. Portable GPS System - how to make sure it's not stolen?

  4. Car Mirror with GPS and Bluetooth

  5. Honda Dealer tracking system reliable?

  6. Hybrid Civic with NAVI / GPS?

  7. Find Lost Vehicles With GPS Locators

Loading...