Autolock after head unit install screwed up.

Discussion in 'General Motoring' started by SaH, May 16, 2004.

  1. SaH

    SaH Guest

    I installed a Sony head unit into a 99 Civic. I used a harness adapter
    to avoid any splicing. Once complete, the unit worked fine.

    The unit beeps when you shut off the car to remind you to remove the
    face plate. I soon noticed that if you do not remove the face plate, the
    remote doorlock system will not unlock the doors anymore. It will lock
    the doors, just not unlock. Also, when you trigger the remote, the face
    plate alarm sounds each time. (So long as the face plate is on)

    Anyone have any ideas here ?
     
    SaH, May 16, 2004
    #1
  2. SaH

    Randolph Guest

    Just for kicks, remove fuse number 30 from the under-dash fuse box. Test
    the system again and report back to the news group with your findings.
     
    Randolph, May 17, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 2003 Honda Civic LX Head Unit Removal

  2. Accord 6 cd head unit - aux in adapter

  3. replacing ex head unit

  4. putting a 96 rl head unit in a 92 legend??

  5. Alpine Head Unit Frying RCA Cables?

  6. Just removed head unit, keyless entry still works!

  7. Head unit install screwed remote locks, hlp.

  8. Problem With Alpine Head Unit (Part 2)

Loading...