Break Roter Question

Discussion in 'General Motoring' started by Paul, Mar 19, 2007.

  1. Paul

    Paul Guest

    My son had his 2000 Accord in for an oil change and the oil change people told him his rear rotors were corroded and need to be changed. They wanted $300.00 for it. He put them off until he got some other opinions.

    Has anyone ever heard of this problem with rotors and is $300.00 a reasonable price ?

    He has no problem breaking and doesn't hear any unusual noises.

    Thanks.
     
    Paul, Mar 19, 2007
    #1
  2. Paul

    G-Man Guest

    Jesus, they all corrode! Are they warped? Worn past limits? You are more than likely getting scammed.

    New rotors can be had for under $100 at AutoZone. Easy install yourself with a little knowledge. This model of accord is one of the easiest I have changed rotors on.

    If I WERE going to change the rotors, I'd do it and new pads at the same time.

    BTW, the material these are made of will rust immediately when they get wet. I always wash them down with a dishwashing liquid before installing to get all the grease off them. They will have rust on them before I even get them on the car. This is NOT a problem.

    G-Man
    My son had his 2000 Accord in for an oil change and the oil change people told him his rear rotors were corroded and need to be changed. They wanted $300.00 for it. He put them off until he got some other opinions.

    Has anyone ever heard of this problem with rotors and is $300.00 a reasonable price ?

    He has no problem breaking and doesn't hear any unusual noises.

    Thanks.
     
    G-Man, Mar 19, 2007
    #2
  3. Paul

    N.E.Ohio Bob Guest

    Rear disc brakes (breaks) on any Honda car need YEARLY cleaning and
    lube (silicone) to last as long as drum style. Rust in the disc isn't a
    sign of needing new ones. bob
     
    N.E.Ohio Bob, Mar 19, 2007
    #3
  4. Paul

    Dano58 Guest


    It's 'brakes', why can't people spell this properly?! ;-)

    The only time I would be concerned with rust on the rotors is if they
    were ENTIRELY rusty, i.e., there was no clean area indicating that the
    brakes pads were contacting the rotor. If this is the case, then
    change them. But I would not have it done at an oil change place, in
    my experience they are challenged at replacing wipers.....

    Dan D
    '07 Ody EX
    Central NJ USA
     
    Dano58, Mar 19, 2007
    #4
  5. Paul

    Paul Guest

    Thank for the feedback everyone......this helps.......
     
    Paul, Mar 20, 2007
    #5
  6. Paul

    Say What? Guest

    You know how to tell if the oil change artists are lying to you?

    Their lips are moving. I changed the air filter on my Chrysler T&C
    about 900 miles before going in for an oil change. Would you believe
    that air cleaner was ready to bite the dust? (no pun intended). Told
    the dweeb that it had less than 1,000 miles on it and go find some widow
    to victimize and then followed him out to the bay to watch him finish
    the last oil job his store was ever going to do for me.

    Anal pores!
     
    Say What?, Mar 20, 2007
    #6
  7. Paul

    Dano58 Guest


    LOL, I've had that happen with 2-day old windshield wipers as well!
    THAT was fun, especially since the waiting room was filled at the
    time!

    Dan D
    '07 Ody EX
    Central NJ USA
     
    Dano58, Mar 20, 2007
    #7
  8. Paul

    John Horner Guest

    Sounds like BS. Have your car serviced at a place which specializes in
    Hondas and which you trust, including for routine oil changes. The
    quick lube places give the employees bonus money based on how much extra
    stuff they are able to sell you. Sometimes they take the money and
    don't do the work. Have a look at the NBC LA special busting Jiffy Lube:

    http://www.nbc4.tv/video/9152183/detail.html
     
    John Horner, Mar 22, 2007
    #8
  9. Paul

    G-Man Guest


    Bad spellers of the world, Untie!

    G-Man
     
    G-Man, Mar 23, 2007
    #9
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.