cv joints

Discussion in 'General Motoring' started by vic zarka, Nov 3, 2003.

  1. vic zarka

    vic zarka Guest

    Has any one had trouble with cv joints making noise when turning???? I
    have change these joints several times( I will have to say I did them
    one at a time (several months apart) and the noise is always there( crap
    I changed the ronge joint) and noise dosen't change. I have changed
    each side at least twice now I begining to think there is an other
    problem like the snap rings may be slipping that holds the shaft
    together or the motor is off center (but some one said that that can't
    happen the off centering) I am stumped hope some one can give me a clue
    HELP Vic
     
    vic zarka, Nov 3, 2003
    #1
  2. vic zarka

    Bob Guest

    Yes, time to have them replaced. The grease is now gone probably because the
    boot is torn or gone.
     
    Bob, Nov 4, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. cv joints...can i wait a little?

  2. Quickie lube joints

  3. crv cv joints

  4. 1997 CRV CV Joints

  5. 88 Accord ball joints

  6. Ball joints

  7. CV joints on 1997 Civic

  8. '88 Legend Coupe lower ball joints

Loading...