Disk brake rotor replacement 97 Accord

Discussion in 'Accord' started by butchb, Jul 10, 2008.

  1. butchb

    butchb Guest

    Brake pad on inside of front brake wore out and the rotor is fairly
    badly gouged. When replacing a 97 Accord disk brake rotor, is it
    necessary to press in the wheel bearing or is it possible to just
    unbolt the thing.

    This is a made in Japan Accord if that makes a difference. Thanks
     
    butchb, Jul 10, 2008
    #1
  2. butchb

    jim beam Guest

    if you've already taken the wheel off to inspect the disk for gouging,
    you should have been able to tell while you were there... if not, with
    respect, you shouldn't be thinking of doing any work yourself.
     
    jim beam, Jul 11, 2008
    #2
  3. butchb

    motsco_ Guest

     
    motsco_, Jul 11, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Brake disk 1990 accord EX

  2. brake service 98 isuzu rodeo 2WD. Do I have to re-surface the rotor for replacing the brake pad.

  3. 02 civic, disk brake pin bolts

  4. 97 accord disk brake caliper

  5. Disk brake rotor chronically warps (1992 Honda Civic Si)

  6. Honda Disk brake pads vs. Wagner (or other)?

  7. 99' Accord Brake Squeak - just replaced brakes, rotor and rotor again

  8. Civic brake disk thickness?

Loading...