Driveaxle Inner CV Housing

Discussion in 'General Motoring' started by dk, Oct 4, 2003.

  1. dk

    dk Guest

    Have an '89 Accord my son pulled and disassembled the axle w/o marking the
    inner housing, spider, or roller placements. After re-reading the
    disassembly instructions, it was then noticed the placement of these items
    should have been marked.
    What is the worst that could happen if these items are not reassembled in
    the original placement?
     
    dk, Oct 4, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 2001 Accord EX V6 - air cleaner housing problem

  2. replacing side mirror housing on Ridgline

  3. Inner tie-rod ends

  4. 1999 Honda CR-V, Clock and Immediate housing.

  5. Surface Cracks in 5-spd Tranny Bell Housing (Aluminum Casting).Serious?

  6. 94 accord inner tie rods

  7. Driveaxle hub nut - removal?!?

  8. Removing Thermostat housing on 87 Accord

Loading...