ECU Identification/Chipping

Discussion in 'General Motoring' started by delSol-owner, Aug 24, 2006.

  1. delSol-owner

    delSol-owner Guest

    I would like to identify the ECU on my 93 del Sol S. The car has a D15B7
    engine, 5 Speed Manual. From googling around I think it has a P6 ECU.
    I want to be sure. Is there a recommended procedure for disconnecting/
    reconnecting the ECU?
     
    delSol-owner, Aug 24, 2006
    #1
  2. delSol-owner

    AudioGuy93DelSol Guest

    You have a P06. To remove it, disconnect your battery and then just
    unplug the three large connectors from the ECU.
     
    AudioGuy93DelSol, Aug 24, 2006
    #2
  3. delSol-owner

    delSol-owner Guest

    OK that leads me to the next question. When I order the chipping kit it
    must be for a P06 I assume? I am thinking of getting it from xenocron.net.
    Whats the difference between P72, P30, P28, and P06. I have downloaded a P06
    ECU binary code from pgmfi.org. But when I open the file with crome it
    says P28 at the bottom left corner. I am a bit confused.

    All I am interested is in datalogging and don't want to mess with
    tuning at this point.
     
    delSol-owner, Aug 25, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. resetting the ECU

  2. 'Super-chipping' Accord 2.0 LSi auto... Is it worth it??

  3. follow up to my 1989 Honda Civic DX Sedan TDC Sensor/ECU Problem.

  4. 94 del sol burned ecu

  5. honda car identification help

  6. CRX ECU solders cracked? Also ECU v ELD charge problem.

Loading...