EDU error codes for 89 Civic DX Hatch back

Discussion in 'Civic' started by Curt, Jan 20, 2005.

  1. Curt

    Curt Guest

    Anyone know how to interpret that blinking light on the ECU? I got a check
    engine today and saw that the ecu light is flashing one time, pause, one
    time, pause, etc. It felt like the car missed (didn't fire for one cycle or
    something) and then came right back. That's when the check engine light
    came on. Thanks for ya'll help.
     
    Curt, Jan 20, 2005
    #1
  2. Curt

    K`Tetch Guest

    These are listed in the Haynes manuals, but you're right, it is often
    caused by a misfire (or is on my 88 civic anyway)

    one blink is an error in the oxygen sensor, caused by , yep, a misfire
    sending unburnt stuff down to the cat.
     
    K`Tetch, Jan 20, 2005
    #2
  3. Some great contributor found this link
    http://www.iequus.com/assets/manuals/3173_ICCR_E_14JAN03.pdf to a manual
    that covers testing your car, and many other Japanese imports from the late
    80s through 1995. Wherever it refers to a "code reader" they are talking
    about the jumpers they sell with this manual for $35 US or so. I bought the
    set before this was posted :-(

    Mike
     
    Michael Pardee, Jan 20, 2005
    #3
  4. Curt

    TeGGer® Guest




    That's a Code 1: Oxygen Sensor.

    Pull the Backup fuse (or Hazard/Backup) under the hood for 30 seconds, then
    replace. This will reset the Check Engine light.

    If the CEL does not illuminate again, forget about it. If it does, check
    all wiring for integrity. If good, replace oxygen sensor.
     
    TeGGer®, Jan 21, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.