Engine vibrations after timing belt change

Discussion in 'General Motoring' started by michalis0, Jan 20, 2007.

  1. michalis0

    michalis0 Guest

    Hi,

    I recently did a timing belt change (water pump, seals,etc)
    on my 94 Honda Accord.

    After this it feels like the engine (and the car) is vibrating
    at certain RPMs, which wasn't happening before.

    Any ideas what might be causing this??

    TIA
    michael
     
    michalis0, Jan 20, 2007
    #1
  2. michalis0

    loewent via CarKB.com Guest

    to remove the t-belt, the upper motor mount has to be removed on that side of
    the engine. Perhaps it was not torqued properly? Also, that model has a
    balancer shaft belt, perhaps it was installed incorrectly.

    Or maybe the timing is out by a tooth, causing vibration at certain speeds.

    t
     
    loewent via CarKB.com, Jan 21, 2007
    #2
  3. michalis0

    motsco_ Guest

    ============================================

    The balancer shaft belt is out of time, It's the other 'belt' on your
    invoice. Must not have been a Honda dealer.

    'Curly'
     
    motsco_, Jan 21, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '91 Accord engine overheat after timing belt change

  2. Questions after changed the timing belt for my 96 Accord

  3. 1995 Passport - Overheating after Timing belt tensioner change -- belts removal/installation

  4. 98 Civic HX - Oil leak after Belt Change

  5. civic won't start after timing belt change-HELP!

  6. How do I properly install timing belt, balancer belt on H22A Engine? Please Help

  7. 4500rpm idle after timing belt change

  8. Lower gas milage after timing belt change

Loading...