F22B Timing Belt

Discussion in 'General Motoring' started by howard, Apr 23, 2008.

  1. howard

    howard Guest

    My next door neighbor has a 95 Prelude. He has put what is called a JDM
    motor or a Japanese domestic motor that originated from Japan. It is a 2.2
    liter, DOHC, non-Vtec 4 cylinder. The engine family is F22B. He broke a
    timing belt and the proper one is not available for U.S. models. I've also
    checked our local Acura dealer and they don't show an application for that
    number. The part number is 14400-PT2-004. It has 126 teeth on the belt. Some
    U.S. model Hondas have a belt with 127 or 125 teeth but not 126.
    Anybody have any idea where this belt can be gotten? Thanks.
    Howard
     
    howard, Apr 23, 2008
    #1
  2. howard

    Jeff Guest

    Japan
     
    Jeff, Apr 23, 2008
    #2
  3. howard

    howard Guest

    Duh! Really?
     
    howard, Apr 23, 2008
    #3
  4. howard

    jim beam Guest

    there's a japanese guy that posts here periodically. look back through
    the archives and call him.
     
    jim beam, Apr 23, 2008
    #4
  5. howard

    jim beam Guest

    oh, and check the motor before bothering. if the belt broke, you may
    have damage making it uneconomic to repair. look for excessive valve
    lash - you can do that without removing the head.
     
    jim beam, Apr 23, 2008
    #5
  6. howard

    Tegger Guest



    Howard and I have been corresponding via email about this, but since the
    question has also been posted publicly, I'll also post what I've found so
    far...

    I can get both that timing belt and the corresponding balancer belt (13405-
    PT0-004) up here in Canada. The TB is about $93 and the BB is about $59.

    The belts do not come up in the Honda database as being for any specific
    application, but that doesn't really mean anything.

    We do not yet know for sure if this is a 126-tooth belt. Howard will ask
    his neighbor to confirm the belt is actually still needed, then I will have
    one delivered so we can count the teeth.
     
    Tegger, Apr 23, 2008
    #6
  7. howard

    Tegger Guest



    For anybody still following this...

    Howard ended up finding a local source of supply for this belt, so he
    doesn't need mine.

    However...

    I have received an email from somebody else who tells me the timing belt
    from a 1988 Dodge Caravan 2.5L will fit the Honda F22B. Apparently this
    Dodge belt is just the right size: 126 tooth, round, 24mm (15/16). Dayco,
    Gates and Duralast all make one under $20.

    I have no way of confirming the above, so follow at your own risk.
     
    Tegger, May 20, 2008
    #7
  8. howard

    Tegger Guest


    And one more thing... The Gates part number is supposed to be T132.
     
    Tegger, May 20, 2008
    #8
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.