Finding a clay bar

Discussion in 'General Motoring' started by Chris Garcia, Jul 27, 2003.

  1. Chris Garcia

    Chris Garcia Guest

    Time to make a trip to Pep Boys to get something to remove the 7 1/2 years
    worth of tree sap on my "new" baby .. After much research, I think I'm
    going to go with a clay bar kit. Is there a certain brand I should look
    for?

    Also looking for some sort of "scratch repair/remove/coverup" stuff.

    I'm pretty sure I'll have to wax the car afterwards. I've always used
    Meguiar's. Should I use something else?

    mmm banana scented wax.

    --
    -Chris

    http://www.ChrisGarcia.com <- My Homepage
    http://starwars.chrisgarcia.com <- Centerpoint Station, the "ghost-town" of
    the Star Wars Universe!
     
    Chris Garcia, Jul 27, 2003
    #1
  2. Chris Garcia

    alan Guest

    Well, the Meguiar's clay is kind of "clay-like" in that it is kind of
    crumbly. After you do a section, you can scrape off the used surface of
    the clay with a knife. The mother's Clay is very rubbery and stretchy.
    It is good for folding over to expose a new section.

    If I were you, I'd try degreasing or bug-n-tar-ing the tree sap off first.
     
    alan, Jul 27, 2003
    #2
  3. Chris Garcia

    Chris Garcia Guest

    alan <_not_spam_me.com> decided to join the conversation
    tried that.. some of the newer stuff came off, but the stuff that's been
    there since day one.. nuh uh ...



    --
    -Chris

    http://www.ChrisGarcia.com <- My Homepage
    http://starwars.chrisgarcia.com <- Centerpoint Station, the "ghost-town" of
    the Star Wars Universe!
     
    Chris Garcia, Jul 27, 2003
    #3
  4. Chris Garcia

    Falco Guest

    Zaino Bros is TEN times better than Maguires

    http://www.zainostore.com

    Read This

    http://www.nsxsc.com/nsexcitement/waxtest.html
     
    Falco, Jul 27, 2003
    #4
  5. Chris Garcia

    Chris Garcia Guest

    "Falco" <> decided to join the conversation on
    27 Jul 2003 with message
    bleh oh well.. i did have a (low) budget to work with

    i got the "Clay Magic" clay bar.. It managed to take off some of the
    newer sap spots very easily.. the older stuff refused to come off.. i
    decided to go over the whole car with it, and it made the car feel VERY
    smooth..

    i used some meguiar's liquid wax .. if anything to just hold it over
    (since you're spose to wax right after a clay bar) until i can get it
    professionally detailed.

    at least the car will shine for a few weeks.

    .... don't think i didn't take anyones advice, btw.. i'll use it in the
    future.. i just didn't get any of these messages until AFTER i went to
    pep boys..

    Thanks to everyone for the advice!


    --
    -Chris

    http://www.ChrisGarcia.com <- My Homepage
    http://starwars.chrisgarcia.com <- Centerpoint Station, the "ghost-town"
    of the Star Wars Universe!
     
    Chris Garcia, Jul 28, 2003
    #5
  6. Chris Garcia

    SoCalMike Guest

    kinda neat, eh? ive used it for paint overspray as well.
    clay is clay, and wax is a personal preference
     
    SoCalMike, Jul 28, 2003
    #6
  7. Chris Garcia

    Chris Garcia Guest

    "SoCalMike" <> decided to join the
    conversation on 27 Jul 2003 with message @sccrnsc02:
    very neat.. i focused on the reaaaallly baked on sap and it did nothing,
    so i was like "oh well, guess i'll hit the whole car anyways" ... then i
    hate a no-so-old sap spot.. took it off in like 3 passes.. all i could
    say was "... daaamn!"
    well, i saw a review of meguiar's.. apparently i have a bad personal
    preference :)

    --
    -Chris

    http://www.ChrisGarcia.com <- My Homepage
    http://starwars.chrisgarcia.com <- Centerpoint Station, the "ghost-town"
    of the Star Wars Universe!
     
    Chris Garcia, Jul 28, 2003
    #7
  8. Chris Garcia

    SoCalMike Guest

    i just use the zymol, from costco. seems to work as well as they claim in
    that article. smells good, too! coconutty!
     
    SoCalMike, Jul 28, 2003
    #8
  9. Chris Garcia

    sysnix Guest

    i got the "Clay Magic" clay bar.. It managed to take off some of the
    Try using some acrysol, it is a great product to remove glue,
    stickers, tar, etc. I've even had luck getting dirt out of stained
    paint.
    Remember, you wax to protect the paint. To shine it up, try some
    polish, and if the paint is oxidized, use the oxidize remover first.
    (sp?)
     
    sysnix, Jul 28, 2003
    #9
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.