front end "clunk" on ’99 crv....

Discussion in 'CR-V' started by teefus, Oct 17, 2005.

  1. teefus

    teefus Guest

    new here, just had a front end question about my ’99 crv. the
    passenger side has a pronounced "clunk" when hitting a small to
    medium sized bump in the road. the shop/lot i bought it from in may
    ’04 said they replaced that ball joint and it got better but it is
    still there to some degree. any thoughts? thanks in advance.
     
    teefus, Oct 17, 2005
    #1
  2. teefus

    Dario Moreno Guest

    I have the same problem with my 97 CRV. Dealer said I needed
    stabilizer bars to be changed. I have not had it replaced yet so
    I do not know whether it would fix the problem.
    http://www.autoforumz.com/eform.php?p=689012
     
    Dario Moreno, Oct 17, 2005
    #2
  3. teefus

    TeGGeR® Guest


    Different year, but might be the same fix:
    http://www.tegger.com/hondafaq/tsb/crv/x98-050e.pdf
     
    TeGGeR®, Oct 18, 2005
    #3
  4. teefus

    Rich Gray Guest

    I had the same problem with my '97 V. Ended up being the front stabilizer
    links one on each side. It was like driving a new car!
     
    Rich Gray, Oct 18, 2005
    #4
  5. teefus

    Muzhen Liao Guest

    Hi, I had a similar experience just like yours with my 99 CRV. I spent a
    lot of money with so many guesing works in so many repairing shops.
    Finally this problen caused by harden and loosen mounting rubber parts
    with the stabilizer bar support. You may simply change the rubbers part
    or just add some rubber pieces between the bar and old parts.

    David
     
    Muzhen Liao, Jun 12, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.