Fuel Filter

Discussion in 'General Motoring' started by electricked, Feb 16, 2004.

  1. electricked

    electricked Guest

    Hi all,

    I've made some observations on my 98 Accord Ex (Automatic) and have some
    questions.

    When I press the gas pedal half way and the car is changing gears there's a
    slight pause and a "dive" on the car's front. The pause lasts between
    500ms-1sec. I'm wondering wether this is fuel or transmission related. Any
    ideas/suggestions?

    Btw, I replaced the spark plugs yesterday and cleaned the spark plug wires.
    After spark plug replacement car runs smoother but still hesitates on gear
    change as described above.

    Thanks!

    --Viktor
     
    electricked, Feb 16, 2004
    #1
  2. electricked

    T. Nelson Guest

    I'm certainly not an expert on automatic transmissions but based on what
    you have said--it appears to me to be a transmission problem since the
    problem only happens when the gears are changing. I advise you to take it
    to a transmission shop and have them check it out--it's possible that they
    can easily fix the problem by making some adjustments. If they try to
    charge you a huge amount of money--don't pay it since I don't believe it's
    a major problem.
     
    T. Nelson, Feb 16, 2004
    #2
  3. electricked

    null_pointer Guest

    I've made some observations on my 98 Accord Ex (Automatic) and have some
    Some ECMs will retard timing during shifts to make life a little
    easier for the transmission. This is another area to look into.
     
    null_pointer, Feb 16, 2004
    #3
  4. I think they are saying take the car in and have it looked at
     
    CaptainKrunch, Feb 17, 2004
    #4
  5. electricked

    electricked Guest

    Are you saying that's the way it should be or does it need any
    fix/adjustments?

    Thank you!

    --Viktor
     
    electricked, Feb 17, 2004
    #5
  6. electricked

    electricked Guest

    I understand and I will. But is it normal for an automatic transmission to
    do that? I've had all manuals until now and this is my first auto.

    --Viktor
     
    electricked, Feb 17, 2004
    #6
  7. ====================

    Viktor,

    Think of it this way: The tranny had to get energy from somewhere to
    change 'state'. Dropping to a lower gear while decelerating wouldn't
    need any input of energy, but to kick itself into a higher gear while
    accelerating it needs a small boost, which it 'stole' by interrupting
    the acceleration curve.

    On a manual transmission, you would have interrupted the acceleration by
    backing off the gas just as you shifted, too. That's how I've always
    pictured it, anyway. :)

    'Curly'

    ===============
     
    'Curly Q. Links', Feb 17, 2004
    #7
  8. electricked

    123.bam Guest

    I tend to believe this is slightly normal. I have a 97ex v6 and notice this
    most when the following
    1 when the transmission fluid is in need of replacement
    2 when you slightly decelerate then step gently back on the gas there is a
    small delay from when you step to when you accelerate.

    btw the 97 automatic in my opinion is horrible at deciding when to shift,
    frankly its just plain wrong. it seems to shift to the highest possible gear
    way way to often, when you accelerate quickly it will often wait 3 seconds
    downshift 2 gears rev to 5800 rpm then upshift 1 gear 1 second later upshift
    agian. or worse yet it will downshift 2 gears rev to 5800 (at this time Im
    letting off the throttle) and it will hover somewhere between gears maintaing
    5800 rpm for 3-5 seconds before deciding what to do.

    In cases like this, its very irritating to have the 3 second delay, when a
    single quick upshift would have sufficed.

    My work around is just to lock it into D3 for round the town driving, and D4
    if Im expecting highway speeds.
     
    123.bam, Feb 17, 2004
    #8
  9. electricked

    electricked Guest

    Viktor,
    Thanks for the reply Curly. Are you saying it could be a power issue; i.e.
    might need to replace battery/alternator? I haven't replaced neither of
    those in a while so it might need replacement, especially the alternator. I
    checked the batter voltage the other day in the freezing wether and it
    seemed fine (12.5 or so... could be a little more I guess but it's a
    decently old batter). And I'm saying replacing since I like my cars running
    smooth. Even though if it's normal for the car to disconnect like that for a
    while, especially in cold weather, I'll make it run smooth if possible. So
    my question now is, can I make it change gears smoother by replacing
    alternator with more powerful, putting a brand new battery, or whatever else
    might need to be replaced. Also, I'll do a transmission oil change soon
    since I did that about 6 months ago if not more.

    --Viktor
     
    electricked, Feb 18, 2004
    #9
  10. electricked

    electricked Guest

    I tend to believe this is slightly normal. I have a 97ex v6 and notice
    this
    I think the ECU stores the driving practices and then uses that to calculate
    how to change the gears. For example when the cold weather comes, my honda
    goes crazy. Starts changing too early, or too late, but once I reset the
    ECU, and accelerate smoother and slower, it stores that and then it drives
    great. On the last ECU reset though, it fixed the incorrect gear-change
    timing, but now it pauses on gear changes.

    Also, something that is probably nothing to do with power/tranny is that
    sometimes when I press hard on the gas, more than half, it doesn't
    immediately change to higher gear, but does nothing for a second, and then
    all of a sudden starts revving up. Could it be that the fuel filter needs
    change? I haven't changed it for as long as I remember (couple years maybe).

    --Viktor
     
    electricked, Feb 18, 2004
    #10
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.