Head Torque Specs

What are the head torque specs on a 91 Honda Civic? Thanks in advance for
the assistance.

 

first step 22 ft/bs
second step 47 ft/lbs
must use proper order

--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/

 

first step 22 ft/bs
second step 47 ft/lbs
must use proper order

--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/

 

first step 22 ft/bs
second step 47 ft/lbs
must use proper order

--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/

 

Also, put engine oil between the washer and the head bolt and a light oil
such as LPS-1 on the threads. It's also a good idea to chase the threads in
the block with a tap (being extremely careful of course to use the correct
size tap). Afterwards, blow out the head bolt holes with carb cleaner and
compressed air (keeping a rag over the top of the holes to catch the crud).

Eric

 

Also, put engine oil between the washer and the head bolt and a light oil
such as LPS-1 on the threads. It's also a good idea to chase the threads in
the block with a tap (being extremely careful of course to use the correct
size tap). Afterwards, blow out the head bolt holes with carb cleaner and
compressed air (keeping a rag over the top of the holes to catch the crud).

Eric

 

Also, put engine oil between the washer and the head bolt and a light oil
such as LPS-1 on the threads. It's also a good idea to chase the threads in
the block with a tap (being extremely careful of course to use the correct
size tap). Afterwards, blow out the head bolt holes with carb cleaner and
compressed air (keeping a rag over the top of the holes to catch the crud).

Eric

 

I don't know if this is true of the newer Honda's, but when i was doing the
final torqe on my '85 Accord, the head bolts are designed to stretch.
For someone that does not do this type of thing on a regular basis, it tends
to make your heart race when you feel it happening.

-Cj-

 

I don't know if this is true of the newer Honda's, but when i was doing the
final torqe on my '85 Accord, the head bolts are designed to stretch.
For someone that does not do this type of thing on a regular basis, it tends
to make your heart race when you feel it happening.

-Cj-

 

I don't know if this is true of the newer Honda's, but when i was doing the
final torqe on my '85 Accord, the head bolts are designed to stretch.
For someone that does not do this type of thing on a regular basis, it tends
to make your heart race when you feel it happening.

-Cj-

 

Best to use anti-sieze compound (e.g. Permatex) on threads and washers.