Honda Accord Jacks and Kits

Discussion in 'Accord' started by carlos.valadez.spotsylvania, Dec 17, 2005.

  1. I purchased a 1996 Honda Accord with no jack and on ebay purchased a
    jack that I realized was for a Honda Accord from 00 through 05. Will
    this jack work on the older Honda Accord?
     
    carlos.valadez.spotsylvania, Dec 17, 2005
    #1
  2. carlos.valadez.spotsylvania

    Steve Mackie Guest

    I purchased a 1996 Honda Accord with no jack and on ebay purchased a
    You own the car and the jack. Does it work?
     
    Steve Mackie, Dec 17, 2005
    #2
  3. carlos.valadez.spotsylvania

    Elle Guest

    www.slhonda.com 's has an online parts site where one can
    compare part numbers for Hondas. You'll find the jack listed
    under "tools-jack" in the bumper etc. section.

    The 2002 Honda Accord LX shows two jacks that work for the
    car. One of them has the same part number as the 1996 Accord
    LX.

    The jacks look the same as the two jacks I use on my 91
    Civic's jack. One of these jacks came with the car. The
    second I bought at a junkyard and is rated a bit lower but
    still well above the weight for my 91 Civic.

    All the jacks I mention above are the same in appearance.

    I think I'd just compare the weights of, say, a 2002 Accord
    and a 1996 Accord and then make a decision from there.
    www.edmunds.com might have the weights for each, under a
    "specifications" section.

    You're probably okay, but I too would check first.
     
    Elle, Dec 17, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.