Honda Seals

Discussion in 'General Motoring' started by Trail Shredder, Feb 25, 2005.

  1. Trail Shredder

    Trail Shredder Guest

    Going to be replacing my valve cover gaskets and tube seals this weekend on
    my 92 accord. Should I put a slight oil coating on them or silicone grease
    or just dry?
     
    Trail Shredder, Feb 25, 2005
    #1
  2. Trail Shredder

    halo2 guy Guest

    on the tube seals you can use just motor oil or whateve to facilitate
    installation and help avoid chaffing or nicking the o-rings. The valve
    cover gasket shouldn't need anything except a dab of sealer at a couple
    areas notated in the manual.
     
    halo2 guy, Feb 25, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. window seals on a 2000 accord and mes connector

  2. Valve seals?

  3. hard to install valve stem seals

  4. CV axle seals - to change or not?

  5. 92 Civic valve stem seals Black vs White/silver

  6. How to quiet sunroof seals

  7. How far in to press balance shaft seals on 2.2L Accord Motor?

  8. any advice for changing valve guide seals? 90 Civic Ex 1.6L 5spd

Loading...