How may I unlock all four doors with a SINGLE push of the keyless entry button?!

Discussion in 'General Motoring' started by 87 honda man, May 18, 2004.

  1. 87 honda man

    87 honda man Guest

    Is there a way that I can change the keyless entry system to unlock
    all four doors with the push of the button once, rather than twice on
    my 2003 Accord EX?
     
    87 honda man, May 18, 2004
    #1
  2. 87 honda man

    Im anonymous Guest

    Not without modifying something on the car. Every keyless entry
    system I've used is like this. It's a safety feature.
     
    Im anonymous, May 19, 2004
    #2
  3. 87 honda man

    Dick Guest

    Yes, but unless you are an electronic engineer, you will need to hire
    an engineering company to modify the computer in your Honda that
    controls this function. Might cost more than the car. Just push it
    again and save the big bucks.
     
    Dick, May 19, 2004
    #3
  4. 87 honda man

    Honda Doc Guest

    No.
     
    Honda Doc, May 19, 2004
    #4
  5. 87 honda man

    Jon Guest

    Stops kids playing with it and accidental unlocking by accidental contact.
    Jusr pretend you have to arm it to set it. First click listen second click
    unlock. Youl'l get over it...
     
    Jon, May 20, 2004
    #5
  6. 87 honda man

    Randolph Guest

    I have personally installed two after-market systems that can be
    programmed to either unlock all doors on first press or unlock only
    driver's door on first press. Your question is not at all as ridiculous
    as some other poster make it out to be. That particular after-market
    system is $40, and you don't need to be an electrical engineer to make
    it work.

    OK, I am done ranting now. Thanks for bearing with me.

    It would not surprise me if you can turn this feature off or on on the
    factory system. If you ask your dealer, he may or may not know about it.

    Barring that, a fairly simple re-wire will also accomplish what you
    want. The door lock control module has 3 outputs for the lock actuators:
    One "lock" output common to all 4 doors, one "unlock" output for the
    driver's door and one "unlock" output common to the remaining three
    doors. At the module, you can snip the wire for "unlock remaining doors"
    and connect it together with the "unlock driver's door" output. It will
    cost you a $0.50 splice tap and an hour of your time.
     
    Randolph, May 20, 2004
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.