How to set idle on a 97 Civic DX

Discussion in 'Civic' started by larryr, Sep 6, 2004.

  1. larryr

    larryr Guest

    Is it possible to set the idle speed on a 97 Civic DX w/manual trans, or
    is this something that has to be done by computer at a dealer? The car
    runs fine and never stalls and it idles smoothly, but it only idles at
    about 300-400 rpm. If this is something that can be done at home, what
    is the procedure? Thanks, i'm new to honda's so any help would be
    appreciated....Larry
     
    larryr, Sep 6, 2004
    #1
  2. larryr

    Randolph Guest

    The procedure depends on what engine you have (The D16Yxx code, several
    engines were used in '97, I don't know what the DX used). On some
    engines, the adjustment is a simple DIY procedure. On others, it can be
    done with just a tachometer, but it is recommended to use a factory
    programming tool. If you post the first 6 characters of the VIN, I'll
    post the correct procedure for your car. Also state if the car is USA
    spec. or Canadian spec. (those are the only two countries I have the
    procedures for).

    One possible cause of low idle is a dirty IAC (Idle Air Control) valve.
    If this is the case, it should be cleaned before you try to adjust the
    idle speed.
     
    Randolph, Sep 6, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. set idle '90 CRX HF

  2. Best ignition wire set for 1983 Civic

  3. How do i set the timing on my 1995 Honda Accord. 4 cycl. Vtec?

  4. i set up the timing and now it will start but wont idle

  5. 97 Civic - How do you set the ignition timing?

  6. how to set timing in 87 honda crx

  7. how do I check and set timing on a 96 honda accord?

  8. How to set timing

Loading...