I broke off my Oxygen sensor

I'd be tempted to forget removing it and simply drill a new hole and
tap it. I think I would be done in an hour including a trip to the
store for the tap if I didn't have one, but I do.

 

WD-40 is good, but not as a lubricant or penetrant (unless you have no real
option available, then it's better than nothing in a pinch). It works well
for cleaning up oily tools, for getting wet ignitions going, and leaves a
nice smell on your hands; manly (sorry, Elle) and pleasant. It will also
restore ribbons if you have a dot matrix printer around. Some people have
used it as diesel starting fluid, but I've never had the occasion.

When I was a cyclist I used the WD-40 chain lube system. Every weekend I'd
spray the "power train" (chain and everything) with Gunk, hose it off, and
spray it with WD-40. It's a lazy way to keep the chain clean and lubricated
enough for light use, but the chain does wear faster than it does with real
chain lube. Oddly, sometimes bicycle brakes work better (don't chatter, more
even grip) if the rim is wiped with a bit of WD-40... testament to the
limitations of WD-40 as a lubricant.

Mike

 

WD-40 is good, but not as a lubricant or penetrant (unless you have no real
option available, then it's better than nothing in a pinch). It works well
for cleaning up oily tools, for getting wet ignitions going, and leaves a
nice smell on your hands; manly (sorry, Elle) and pleasant. It will also
restore ribbons if you have a dot matrix printer around. Some people have
used it as diesel starting fluid, but I've never had the occasion.

When I was a cyclist I used the WD-40 chain lube system. Every weekend I'd
spray the "power train" (chain and everything) with Gunk, hose it off, and
spray it with WD-40. It's a lazy way to keep the chain clean and lubricated
enough for light use, but the chain does wear faster than it does with real
chain lube. Oddly, sometimes bicycle brakes work better (don't chatter, more
even grip) if the rim is wiped with a bit of WD-40... testament to the
limitations of WD-40 as a lubricant.

Mike

 

Did you even bother to look at the pictures?

If he leaves it as is, he's going to have a hell of an exhaust
leak, not to mention that there's not likely to be sufficient
meat in any other area of the manifold to mount an O2 sensor.

 

Did you even bother to look at the pictures?

If he leaves it as is, he's going to have a hell of an exhaust
leak, not to mention that there's not likely to be sufficient
meat in any other area of the manifold to mount an O2 sensor.

 

Maybe he can just take the whole manifold off and take it to a welding
shop or such and have them remove it, and then re install it?

Bob

 

Maybe he can just take the whole manifold off and take it to a welding
shop or such and have them remove it, and then re install it?

Bob

 

I agree with Mike.
It cleans up tools really well.

I am restoring an old VW bug and its rust just laughs at WD40.
A much better choice is PB blaster or Kroil for penetrating oil.

Remco

 

I agree with Mike.
It cleans up tools really well.

I am restoring an old VW bug and its rust just laughs at WD40.
A much better choice is PB blaster or Kroil for penetrating oil.

Remco

 

WD-40 = Water Displacement formula #40.
It never was meant for loosening rusty bolts.

 

WD-40 = Water Displacement formula #40.
It never was meant for loosening rusty bolts.

 

if room permits, a sawzall would make quick work of that

 

if room permits, a sawzall would make quick work of that

 

pleasant.

Sure, if all a man wants around him is other manly
technicians.

I advise "Goop" or similar, followed by ordinary soap, then,
for men, cologne or aftershave. (Tip: Amazing how huggable
men are when the scent of even a little aftershave is in the
air--I'm not proud of it, but with enough aftershave, I'll
swoon even before men of a different political party
affiliation.)

Anything but that WD-40 (or PB Blaster, etc.) odor...

Brandy? Rav?

I've stopped bringing penetrating oils into the house for
even little cleanup jobs at the kitchen sink, because they
make the whole house reek for a day.

Happiest of New Years to all. Be safe, find peace.

 

pleasant.

Sure, if all a man wants around him is other manly
technicians.

I advise "Goop" or similar, followed by ordinary soap, then,
for men, cologne or aftershave. (Tip: Amazing how huggable
men are when the scent of even a little aftershave is in the
air--I'm not proud of it, but with enough aftershave, I'll
swoon even before men of a different political party
affiliation.)

Anything but that WD-40 (or PB Blaster, etc.) odor...

Brandy? Rav?

I've stopped bringing penetrating oils into the house for
even little cleanup jobs at the kitchen sink, because they
make the whole house reek for a day.

Happiest of New Years to all. Be safe, find peace.

 

LOL. Reminds me of that joke about having sex in a canoe.

Ulf

 

LOL. Reminds me of that joke about having sex in a canoe.

Ulf

 

Yes. That never even dawned on me.
And I'm usually the first one to reach for my air or electric tools.

 

Yes. That never even dawned on me.
And I'm usually the first one to reach for my air or electric tools.

 

From this we learn a few things:

1) Yes, WD40 is mostly good at loosening money that was stuck in your
wallet.

2) Popular Mechanics is full of shite.

There are two and *only* two penetrants I mess with any more: Kroil and
Chrysler P/N 4318039.