ignition control module ??

Discussion in 'General Motoring' started by larryk, Dec 3, 2006.

  1. larryk

    larryk Guest

    I have a 95 accord EXR 2.2 vtec. Sometimes when the engine is warm the
    car will develop a miss. It seems to only be on the number one
    cylinder. It misses at idle and threw excelleration. The miss is not
    always consistent. It goes from a subtle to a harsh miss and it
    doesn't seem to matter if its a humid rainy day or a very dry day. If
    you turn the car off and let it cool down it will run fine again. I
    have changed plugs and wires and swapped injectors and it still misses
    on the same cylinder. When it is missing there is a very strong smell
    of raw fuel. Could my problem be the ignition control module?
     
    larryk, Dec 3, 2006
    #1
  2. larryk

    motsco_ Guest

    ++++++++++++++++++++++++++++++++++++++++

    If it wasn't a Honda I'd suggest a sticking valve. Have you ever checked
    the valve clearances for the heck of it?

    'Curly'
     
    motsco_, Dec 3, 2006
    #2
  3. larryk

    Jim Yanik Guest

    wrote in
    How about the distributor cap and rotor?
     
    Jim Yanik, Dec 3, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1990 Civic Ignition Module Wiring

  2. Transmission Control Module Rebuild?

  3. 94 accord igniter (ignition module)

  4. Honda Accord Transmission Control Module

  5. 2k Accord srs control module and clockspring

  6. Please help Passport Ignition Module Location?

  7. Need ingition control module (ignitor in distributor) for 1995 Civic

  8. Abs control module(computer) on 96 accord??

Loading...